P.C. TECHNOLOGIES

UNIVERSAL ATC

(Automatic Temperature Compensation)

 

P.C. Technologies offers you an automatic temperature compensator which connects to virtually any existing fuel dispenser without the need for an ATC model for every fuel dispenser model.  Regardless of your dispenser’s configuration, one ATC model can be installed to compensate for volume and/or viscosity.

 

EASY TO CONFIGURE

The Universal ATC will adapt to any present pump configuration. Three modified versions of software and a single configurable ATC module are available to perform compensation on the following dispenser configurations: single, dual1 (single product, two hose), dual2 (two product, two hose), quad, hex, blenders, and eight hose dispensers.  The system is unique in that it does not have to recognize the manner in which an existing dispenser is programmed to operate.

 

EASY TO INSTALL AND USE

 The ATC system is simple to install and simple to operate.  The ATC unit is equipped with an liquid crystal display for viewing product type and temperature in the test mode.  One test button establishes all the communication required to perform testing on any hose.


 

UNIVERSALITY

     The ATC is universally adaptable to any fuel dispenser world wide.

 

ACCURACY

The ATC is designed to perform accurate liquid fuel compensation within temperature limits of -45° to +55° Celsius.  The temperature readings are accurate to plus or minus 0.1°C.

 


CONFIGURABLE

A single ATC model can be configurable, with one of three software versions, to adapt to any dispensing system.  The ATC can be turned off (may be required until site approval is granted) for any hose.  Configurations adapted to are:

- Single hose dispensers

- Dual hose single/dual product dispensers

- Quad dispensers

- Six hose dispensers

- Eight hose dispensers

- Blender pumps


 EASE OF USE

This ATC is equipped with an LCD to display the product type and temperature in test mode.  One test button provides access to testing in all modes of operation.

 

PRODUCT SELECTION

Product types are designated, for each hose,  through jumper selection.  All product types are available.


 

UNIVERSAL ATC TECHNICAL SPECIFICATIONS


INPUT:

Voltage                        115 VAC

Current                         0.1 Amps

OUTPUT (Isolated):

Voltage                         System dependent

Current                         10 ma (max)

OPERATING/STORAGE TEMPERATURE:

-40 to +55 °C

PHYSICAL DESCRIPTION:

4.35² (W) x 1.85² (D) x 8.65² (L)

CSA AND WEIGHTS AND MEASURES APPROVED

                                                        COPYRIGHT AND PATENT PENDING
 

© 2022 Gandhi Holdings Ltd